Foveal FM3_2a Mount
for Cognex In-Sight 5000 and 9000 series cameras
| On this page: |
Motivation
Features
Specifications
Options
Prices and Delivery
Photos, Dimensional Drawings, CAD Files
Mounting Plate Options
Camera Mounting Alternatives
Contact
|
Click to enlarge pictures and drawings. |
Foveal FM3_2a Fine-Adjustment 2-Axis Camera Mount
® "Cognex" and "In-Sight" are registered trademarks of Cognex Corporation. |
other cameras that fit the FM3_2a
|
Motivation
The
Foveal 2-Axis Fine_Adjustment Camera Mounts,
models FM1_2a and FM2_2a,
are designed to match common
machine vision camera mounting configurations.
But a customer expressed the need for something similar
that could easily handle
the unusual mounting screw holes in the
Cognex In-Sight 5000 and 9000 series cameras.
(Other cameras in the Cognex line can be mounted on the FM1_2a and/or FM2_2a mounts. See also the Cognex In-Sight 7000 Mount 
).
So we created the FM3_2a Fine-adjustment 2-Axis Mount. It shares the fine-adjustment features and mounting plate options of the other Foveal FMs (Fine-adjustment Mounts).
Because the FM3_2a is designed specifically for these make and model mounts, we optimized the placement of the Pan and Tilt Axes so they are centered on the imaging element inside the camera body.
The Cognex model series supported include the 5000, 5100, 5400, 5600, 5700, 9000, 9902 and 9912
Note: the stainless steel versions of these cameras are not compatible with the FM3_2a mounts.
However, see the CACognex5000 Camera Adapter can be used with those camera bodies.
Also see our other mounts suitable for fm3_2a_Cognex_DataMan_470.html cameras:
Features in common with all FM models
The 2-Axis Fine-Adjustment Camera Mounts may be supported with the base down or the base up. In either position, the plate the camera attaches to can be either below or above the camera.
When coarse adjustments are unlocked, there is sufficient friction to hold the camera in position. Coarse position can be set by hand.
Fine adjustments are made using a hex wrench, allowing for extremely fine positioning.
Independent adjustment of each axis means each adjustment does not affect the other.
All adjustments and locking are made with a single 3/32 inch hex wrench. Reconfiguration is done with a 9/64 inch hex wrench.
Once the mount is locked, the camera does not move.
While not as robust as the Rigid Mounts, the Fine-adjustment Mount will work very well in applications where the mount will not be subjected to extreme disturbances. They are also suitable for mounting other types of instruments and sensors.
For more robust, two- and three- axis mounts that feature fine adjustment and locking of the pan, tilt, and roll axes, see the Foveal 2- and 3-Axis Rigid Camera Mounts.
| On this page: |
Top
Motivation
Features
Specifications
Options
Prices and Delivery
Photos, Dimensional Drawings, CAD Files
Mounting Plate Options
Camera Mounting Alternatives
Contact
|
Specifications
|
Model FM3_2a 2-axis
FM3 Drawings
Prices and Delivery
| |||
|---|---|---|---|
| Materials | black anodized 6061-T651 aluminum, stainless steel hardware, nylon | ||
| Weight | 16 ounces | 454 grams | |
| Dimensions | |||
| Overall Height | 5.375 inches | 13.65 centimeters | |
| Overall Width | 4.18 inches | 10.61 centimeters | |
| Overall Depth | 3.00 inches | 7.62 centimeters | |
| Maximum Camera Dimensions | |||
| Width at Base | 2.00 inches | 5.08 centimeters | |
| Overall Width | 2.75 inches | 6.98 centimeters | |
| Coarse Position Range | |||
| Pan | 360 degrees | ||
|
Tilt (from vertical)
see illustration below |
∼ 120 degrees backward ∼ 27 degrees forward, with lens cover ∼ 42 degrees forward, without lens cover |
||
Click to enlarge pictures and drawings. |
|||
| Fine Position Range | |||
| Pan | ± 5 degrees | ||
| Tilt | ± 5 degrees | ||
|
Custom Designs are available.
Choose One:
| |||
| Height | 0.25 inches | 0.63 centimeters | |
| Width | 3.00 inches | 7.62 centimeters | |
| Depth | 3.00 inches | 7.62 centimeters | |
|
Rectangular Mounting Plate Dimensions
Drawing
| |||
| Height | 0.25 inches | 0.63 centimeters | |
| Width | 5.00 inches | 12.70 centimeters | |
| Depth | 2.00 inches | 5.08 centimeters | |
|
L-bracket Mounting Plate Dimensions
Drawing
| |||
| Height | 1.25 inches | 3.17 centimeters | |
| Width | 3.00 inches | 6.72 centimeters | |
| Depth | 2.25 inches | 5.71 centimeters | |
| On this page: |
Top
Motivation
Features
Specifications
Options
Prices and Delivery
Photos, Dimensional Drawings, CAD Files
Mounting Plate Options
Camera Mounting Alternatives
Contact
|
Options
|
Finger Adjustment Knobs (FAK) Option
Prices and Delivery
|
|---|---|
| When the need is not set it and forget it but instead the mount frequently needs to be finely adjusted, we offer knobs for the fine position adjustment screws. | |
|
Lock Nuts and Lock Washers (LNLW) Option
Prices and Delivery
|
If your mount will be subjected to high vibration,
extra lock nuts and lock washers might help.
LNLW Installation Manual
|
|
|
Extra Fine Adjustment (EFA) with lock nuts Option
Prices and Delivery
|
|
The normal change in the Pan or Tilt angle is bit more than
2 degrees per turn of the position screws.
Should you need a finer adjustment, this option provides
slightly less than 1 degree per turn.
While shown here with the PTD option (below),
EFA and PTD are separate options.
EFA Manual
|
|
|
Pan and Tilt Protractor Dials (PTD) Option
Prices and Delivery
|
| We offer mounts with Protractor Dials on both the Pan and Tilt Axes so the angles can be read out. See the complete description at Foveal Mounts with Pan and Tilt Protractor Dials. |
| On this page: |
Top
Motivation
Features
Specifications
Options
Prices and Delivery
Photos, Dimensional Drawings, CAD Files
Mounting Plate Options
Camera Mounting Alternatives
Contact
|
Prices and Delivery
United State dollarsFOB New Jersey, United States
6.625% Sales Tax to customers in New Jersey
Call 973 822-2085
Questions? Call 973 822-2085
| On this page: |
Top
Motivation
Features
Specifications
Options
Prices and Delivery
Photos, Dimensional Drawings, CAD Files
Mounting Plate Options
Camera Mounting Alternatives
Contact
|
Photos, Dimensional Drawings, CAD Files
Dimensions in inches.
| Model FM3_2a-RMP (with Rectangular Mounting Plate) | |
|
|
| Click to enlarge pictures and drawings. | |
|
CAD files STEP format
FM3_2a-LMP.stp.zip FM3_2a-RMP.stp.zip FM3_2a-SMP3.stp.zip | |
Mounting Plate Options
There are four mounting plate options for the FM mounts.
| no mounting plate | The pan pivot has two 8-32 threaded holes in it. |
| -SMP3 | Square Mounting Plate suitable for general mounting to flat surfaces. |
| -RMP | Rectangular Mounting Plate for general mounting or T-Slot framing systems. † |
| -LMP | L-bracket Mounting Plate specifically for T-Slot framing systems. † |
|
3 x 3 inch
Square Mounting Plate -SMP3 |
5 x 2 inch
Rectangular Mounting Plate -RMP |
L-bracket Mounting Plate
-LMP |
||||
|
|
FM3_2a-RMP
mounted on T-Slot frame 
|
|
FM3_2a-LMP
mounted on T-Slot frame 
|
||
| Click to enlarge pictures and drawings. | ||||||
|
See CAD files Above
| ||||||
| On this page: |
Top
Motivation
Features
Specifications
Options
Prices and Delivery
Photos, Dimensional Drawings, CAD Files
Mounting Plate Options
Camera Mounting Alternatives
Contact
|
Camera Mounting Alternatives
Adjusting camera mounts can become tedious in tight or inconvenient spaces. We have made the Fine Mounts customer-configurable, so alternative placements of the adjustment screws and the Tilt table are possible.
|
For example,
it may be more convenient to have the camera mounted away from the Pan
axis.
In particular, this allows the camera to look over around a corner or down over
an edge.
Note that in this configuration the Pan axis does not go through the optical center of the camera, although the Tilt axis still does. |
| Click to enlarge pictures and drawings. |
If you need to verify a particular configuration, please contact us.
Cognex In-Sight 7200 Mount
For more robust, two- and three- axis mounts that feature fine adjustment and locking of the pan, tilt, and roll axes, see the Foveal 2- and 3-Axis Rigid Camera Mounts.
| On this page: |
Top
Motivation
Features
Specifications
Options
Prices and Delivery
Photos, Dimensional Drawings, CAD Files
Mounting Plate Options
Camera Mounting Alternatives
Contact
|
Contact Us
For information on purchasing Foveal 2-Axis Fine Camera Mounts please contact us ...
B & B Model Shop Services, Inc. is a partner in the design and construction of the Foveal Fine Camera Mounts.
|
Copyright © 2000 - 2024
Foveal Systems, LLC.
All rights reserved.
|
www.FovealMounts.com/fm3_2a_Cognex_5000.html Wed 07 Aug 2024 11:30:41 AM EDT based on 9.22